Pharmacom Labs and the Basicstero.ws Store

Hey guys! Thank you for having us here on Steroids Wiki.

Let me introduce Basicstero the direct from manufacturer Pharmacom Labs store.
basicstero.ws
Our Introduction and Products Videos (including production-line footage) may be viewed at: Pharmacom Labs Innovations

Basicstero is Pharmacom Labs, NOT a reseller
When ordering from Basicstero, customers can be confident they will receive genuine Pharmacom Labs products.
Please understand, other dealers, including official dealers, are retailers/resellers. Pharmacom Labs may have/had business arrangements with retailers/resellers but Basicstero is the only direct from manufacturer store to purchase genuine Pharmacom Labs products.
Basicstero customers are always guaranteed 100% authentic Pharmacom Labs products!

Pharmacom Labs has worked with and continues to work with resellers. However, our boss decided to open a direct store for the Pharmacom Labs company without extra links in the distribution chain. Its address is basicstero.ws. Hence, we are not intermediate suppliers; we officially represent the Pharmacom Labs company! Due to the fact we are a direct store our prices are lower than resellers. You can check the authenticity of the Basicstero.ws store by entering “basicstero.ws” in the respective section on Pharmacom Labs official site. All products come directly from the Pharmacom Labs manufacturer!

Pharmacom Labs company was founded in 2006 on a base of a small existing pharmaceutical factory in Moldova. Steroid production is legal there. During the first years we produced our products there. Later we moved our manufacturing facilities to Asia due to economic reasons; the production expenses in Asia are lower and raw materials are always at hand which means there is no need to transport them or deal with customs etc.

Now Pharmacom Labs is a world-rebound brand respected for having the highest-quality products and large-scale industry-standard modern equipment and manufacturing processes.
There are several advantages of our company as compared to other manufacturers.

What Should You Know About Our Products?
1. We check filling settings of our production lines before we start to produce each new batch. Each ml of our oils as well as each pill contains the displayed quantity of the raw material. You can check our products via lab analyses such as HPCL and you will assure yourself of our quality.

2. We always add a bit more than 10 ml oil in each vial. We consider the small oil amount that stays in the needle after injection. Hence, we provide approximately 10.5 ml oil in each vial.

3. We don`t have underdosed vials or pills! As you can see in our production videos, our production line is fully automated. We recheck our equipment settings before we launch each new batch. All settings for each vial or pill within one batch are equal. If one vial was underdosed, it would mean that all other vials from this batch are underdosed too, which is just impossible as can be seen by the many analysis results posted online.

4. We pay huge attention to preservation of health, that`s why we carefully sterilize all our oils for intramuscular injections. When using our oils you can be 100% sure you will never catch staphylococcus or any other bacteria. Please read the separate text about it below!

5. Grape seed oil is used as the carrier in all our vials. We also use 5 to 10% pharmaceutical grade ethyl oleate in our oils. As a result, injections are not painful and don`t cause big lumps, etc.
(attention should be paid only with high concentrated oils 450-600 mg/ml! as these may cause irritation to less experienced users)

6. Our products have lot of protection elements against counterfeits, especially protection codes, which can be checked in the respective section of our site. You will always know whether your vial is genuine or not.

7. Our product range has unique compounds, which most other sources do not offer. For example, GW1516 (increases endurance greatly!); along with the regular stanozolol water suspension we produce oil-based stanozolol, which can be mixed with any oils and reduces the risk of abscesses. We offer injectable oxymetholone and methandienone (due to the missing first pass through the liver both have higher bioavailability = efficiency as compared against the oral versions). We have very interesting and extremely popular mixes line. We are now working on several other new compounds! Work is done all the time on developing new products, formulas, mixes, and enhancing the existing formulas!

8. We test all our products internally on our volunteers before we launch them into the market. If some problems are reported, we improve the formulas to correct any issue and only after this start selling. You always get proven and safe products!

9. In our vials we do not use rubber caps, which can be damaged from contact with oil over time! As a result, tiny particles off the rubber can break off when inserting the needle and fall into oil or get into the needle causing dangerous health consequences! Therefore, to eliminate these risks, instead of rubber we use silicon caps, which do not have this shortcoming and are oil-resistant!

10. We take into account remarks of our customers. Everyone can write his or her suggestions and ideas to us and we will consider them! We have full support for our products and are always available and open for questions and new ideas!

11. Our products have one of the best and most secured designs among all steroid manufacturers worldwide! All vials are supplied in original cardboard boxes with brief manuals inside and vials as hologram security sticker that can be scratched off to reveal the product unique verification code.

Why Choose Pharmacom Labs? What are some ways we are different than other labs?
1. Oil, by nature, contains small water particles. When present in the cooking oil you use at breakfast there's little need for concern. But those same water particles present in an oil you are about to inject present a far greater problem. You might know what can happen if you attempt to mix 1 ml of oil and 1 ml of water for injection. But that's only the beginning, the water itself is also a very good medium for bacteria to reproduce - in stark contrast to sterile oil. Therefore, we put great care into oil dehydration to minimize all potential health risks however slim. Many cheap oil-based steroids cannot offer the same guarantee. Pharmacom Labs remains one of the few manufacturers that can offer these measures with high-performance equipment at a decent price!

2. Are you aware of how and under what circumstances some other labs filter their final products? Syringe filters are often used in lesser quality labs, but they are not reliable; a proper filter would need to be at least 22 micrometers as a minimum. If you imagine the process of sieving oil through a filter of an average size to meet commercial demand, you would need at least 600 kPa of pressure. This is simply impossible without sufficient equipment, custom fit vacuum pumps or compressors designed for pharmaceutical use, a pressured air dryer, a large quantity of filters including cyclons. No labs selling cheap products possess such cost prohibitive professional equipment.

3. Do you know if and how other manufacturers avoid double bond (olefinic bond) sequences in ethyl oleate? How do they avoid fast oxidation?
This olefinic bond is the cause of a so-called "unsaturated condition" of EO - all unsaturated acids are highly attracted to all olefin-type combination reactions. Most labs use standard vials and rubber caps purchased from ordinary online supply stores. But ethyl oleate as a solvent can react with rubber causing its oxidation. With time, as you might have guessed, the rubber degrades.
So we ask - how many manufacturers use a non-toxic, hypoallergenic thermoplastic rubber which additionally mitigates this shortcoming? Are they even aware of it at all?

4. Plenty of labs will be quick to tell you they use benzyl alcohol as an antiseptic agent, but do they know that it is truly only effective under very specific controlled conditions? One of the strongest conditions being the pH level of oil - benzyl alcohol loses its antiseptic efficiency at a pH <5 or >7. Do they have the capabilities to control for this? We have our doubts. If you use a cheap testosterone product from a lesser lab, your bloodwork may indeed reflect that it contained active hormone. But we ask you, what could happen with long-term storage of such a product? Believe us, you will not want to inject it into your body!

5. What preserving agents are other manufacturers using against g-negative bacteria - if they are even using them at all?
Benzyl alcohol, while effective against g-positive bacteria, is not sufficient against g-negative bacteria which have a thicker cell membrane making them resistant to not only BA but many preserving agents in general. While we cannot disclose the specific technologies we use as part of our production secret, we guarantee we have the means and the will to use them in our oils.
So we have to reiterate: we have the industrial scale equipment and the technical prowess to ensure all of these standards - and plenty more we cannot disclose. But with that comes a greater cost than what you would find in lesser clandestine labs.

Finally, it is ultimately up to you what you purchase and put inside your body. Whether the products you put inside your body are the cheaper, and can include potential health risks, or are of the highest quality and proven through a rigorous, health-conscious process every time. Our established record of over 10 years and the professional quality we possess compared to the multitude of issues found in smaller, cheaper, short-lived labs speaks for itself.
It's worth a few extra dollars to know you have the best!

Thank you very much for taking the time to learn more about Pharmacom Labs and the Basicstero store.

We look forward to Pharmacom Labs products helping you reach your goals and enjoy continued success
-- our Basicstero crew wishes you all the best.